Ideal Adjustment, Pretension

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Pretension can be checked with or without window cavity cover strip. Pretension is 1.0 mm less with window cavity cover strip. Magnet in special tool 51 0 341 creates the correct door window glass pretension on the seal system for measurement. No force must be exerted on the door or door window glass during measurement.

Insert special tool 51 0 341 in rotary striker of door lock and close rotary striker manually. Carefully close door.

Fig 1: Identifying Special Tool 51 0 341 In Rotary Striker Of Door Lock

Courtesy of BMW OF NORTH AMERICA, INC.

Slide special tool 51 0 342 at distance (B) to door window glass side edge into seal (1) and measure dimension (A) to outside edge of door window glass (2).

Dimension (A) with window cavity cover strip:

A = 47 ± 1 mm

Dimension (A) without window cavity cover strip: A = 48 ± 1 mm

B = 10 mm

Fig 2: Identifying Dimension (A) On Outside Edge Of Door Window Glass

Courtesy of BMW OF NORTH AMERICA, INC.