51 21 235 Removing And Installing/Replacing Bowden Cable For Inside Door Opener On Left Or Right Front Door
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove front door trim
Unhook Bowden cable for release lever:
- Tighten release lever (1).
- Lever out lock (2).
- Detach Bowden cable (3) towards rear/top.
Installation:
For fitting, press release lever (1) fully onto door trim panel.