51 21 180 Removing And Installing/Replacing Cover On Outside Handle

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Lever out cap (1) and release screw underneath.

Installation:

If necessary, replace faulty trim (1).

Fig 1: Identifying Cap

G04791597

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off cover (1) in direction of arrow with outside door handle (2) opened slightly.

Fig 2: Pulling Off Cover

G04752627

Courtesy of BMW OF NORTH AMERICA, INC.

Version with light package:

Installation:

Make sure outside door handle light (1) is correctly positioned in area (2).

Guides (3) of outside door handle light (1) must be correctly seated in carrier for outside door handle (4).

Fig 3: Identifying Area For Positioning Outside Door Handle Light

G04727761

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guides (1) must not be damaged.

Fig 4: Identifying Guides

G04752629

Courtesy of BMW OF NORTH AMERICA, INC.