LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2042 (Body Equipment - Repair (E88)) >> Front Bumper >> 51 11... Installing/Replacing Number/License Plate (Without Base) >> Repairing Thread

Repairing Thread

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Drill out defective hole in bumper (2) to 9.5 mm diameter.

Insert blind rivet nut (1)*.

Secure number/license plate (3) with number/license plate screw (4)*.

Tightening torque, see 51 11 4AZ in 51 11 FRONT BUMPER .

NOTE: *Sourcing reference: BMW Parts Service
Fig 1: Identifying Number/License Plate With Rivet Nut
G04752436Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals