LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2042 (Body Equipment - Repair (E88)) >> Front And Rear Window >> 51 31... Instructions On Gluing Windscreen >> Treatment Of Glued Area In Body

Treatment Of Glued Area In Body

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
ADHESIVE WITH TREATMENT TABLE

Adhesive Treatment
Bonding and sealing compound for car window glass
  1. Clean with spirit (available in pharmacies).
  2. Observe an air drying time of at least 5 minutes (at least 15 minutes when applied to residual bead)
  3. 1-day system:  Apply "Paint Activator A" to paint and residual bead
  4. 1-hour system:  Apply "Paint Activator B" (blue stick) to paint
  5. Observe an air drying time of at least 5 minutes (at least 10 minutes when applied to residual bead)
IMPORTANT: Do not use Sika remover 208 for cleaning in the bonding area.
scientia non olet · About LEMON Manuals