Spacer Buffers
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Before sticking on new spacer buffers, remove all remaining traces of old spacer buffers completely.
Position of spacer buffers must be observed exactly.
Incorrectly fitted spacer buffers will result in:
- Windscreen glass breakage
- Leakage (if the spacer buffer is in the adhesive area)
- Wind noises