LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2042 (Body Equipment - Repair (E88)) >> Front And Rear Window >> 51 31... Instructions On Gluing Windscreen >> Preparation For Assembly >> 1-Hour System: Treatment Of Glass Ceramic Surface (Inside Of Window)

1-Hour System: Treatment Of Glass Ceramic Surface (Inside Of Window)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
TREATMENT OF GLASS CERAMIC SURFACE (INSIDE OF WINDOW) TABLE

Adhesive (with part numbers) Treatment
Glass Activator 2 (yellow stick):
  • 83 19 0 144 142
  1. Clean with spirit (available in pharmacies).
  2. Observe an air drying time of at least 5 minutes
  3. Apply a thin coating of "Glass Activator 2"
  4. Observe an air drying time of at least 2 minutes

Version with inspection window for vehicle identification number in windscreen only (all except US/GB):

scientia non olet · About LEMON Manuals