LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2042 (Body Equipment - Repair (E88)) >> Floor/Luggage/Engine Compartment Panel >> 51 47 491 Removing And Installing/Replacing Rear Underbody Protection >> Single-Part Underbody Protection (E90/E91/E92 AWD)

Single-Part Underbody Protection (E90/E91/E92 AWD)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Remove underbody protection (2) downwards.

Installation: 

Ensure correct seating.

Centre underbody protection (2) and tighten down screws (1).

Fig 1: Identifying Screws On Underbody Protection
G04726250Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals