LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2042 (Body Equipment - Repair (E88)) >> BMW Emblems, Model Emblems >> 51 14 110 Removing And Installing/Replacing Rear Model Designation >> Fitting Dimensions (E82/E88) >> Dimensions

Fitting Dimensions (E82/E88): Dimensions

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

A= 23.5 mm

B= 26.5 mm

NOTE:

Measurements C, D and E are for information purposes only, as determined by carrier film.

118d:  C = 5.5 mm, D = 8 mm, E = 13.5 mm

120d...123d:  C = 8 mm, D = 6.5 mm, E = 13.5 mm

118i:  C = 5.5 mm, D = 8 mm, E = 16 mm

120i...128i:  C = 8 mm, D = 6.5 mm, E = 16 mm

135i:  C = 6.8 mm, D = 6.5 mm, E = 16 mm