Special Tools Required
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
- 41 1 150 FLANGING TOOL FOR GUIDE BUSHINGS
- 41 1 151
- 41 1 152
Special tool kit 41 1 150 comprises:
Bushing 41 1 151
Bolt 41 1 152
Cut off hinge bushing in area (1) with chisel.
Drive out remainder of hinge bushing with punch.
Insert bolt 41 1 152 with new hinge bushing (2) into hinge.
Screw bushing 41 1 151 with flat end (3) pointing upwards onto bolt 41 1 152.
Turn bushing 41 1 151 until taper (1) borders hinge bushing (2).
Screw off bushing 41 1 151 again.
Twist bushing 41 1 151 with flat end (1) onto bolt 41 1 152.
Turn bushing 41 1 151 until gap dimensions (2) are identical.