41 00... Installing A Cavity Acoustic Baffle (Expanded)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Carry over schematic representation to the relevant vehicle type.
The following repair represents the procedure for an already expanded cavity acoustic baffle.
The cavity acoustic baffle remains on the body in this instance.
Before these work steps, prepare the new part so that it is ready to install (adapting, cutting to size, applying welding primer etc.).
Clean contact surface (1) with spirit.
Apply a bead approx. 15 mm high (2) of window glass adhesive to contact surface (1).
Fit, secure and weld up new part.
WARNING:
Ensure adequate ventilation over entire processing period.