LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2039 (Wheel And Tires - Repair) >> Disc Wheels (Rims) >> 36 11 533 Removing and installing/replacing a tire pressure control electronic wheel module (Generation I) >> Labelling of Gen3 electronic wheel module for RDC-LC

Labelling of Gen3 electronic wheel module for RDC-LC

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
  1. Data Matrixcode
  2. BMW part number
  3. FCC ID radio authorization
  4. Electronic wheel module
  5. Transmission frequency
  6. Pressure sensor
  7. Width across flats of union nut
  8. Tightening torque
  9. Production date of electronic wheel module
    Fig 1: Labelling Gen3 Electronic Wheel Module (RDC-LC)
    G06890137Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: The following graphics show exclusively how to install and remove the SP-303 electronic wheel module. The handling instructions also apply without any differences to the Gen3 electronic wheel module!
scientia non olet · About LEMON Manuals