LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2039 (Wheel And Tires - Repair) >> Disc Wheels (Rims) >> 36 11 533 Removing and installing/replacing RDC wheel electronics (2nd Generation/3rd Generation) >> Labelling of generation 3.4/3.41 wheel electronics

Labelling of generation 3.4/3.41 wheel electronics

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
  1. FCC ID = radio authorization
  2. Tightening torque
  3. Pressure sensor
  4. Data Matrixcode
  5. Production date of wheel electronics
  6. Transmission frequency
  7. Wheel electronics ID
  8. Width across flats of union nut
  9. BMW part number
Fig 1: Labelling Of Generation 3.4/3.41 Wheel Electronics
G08505257Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: The following illustrations only show removal and refitting of the 3rd generation wheel electronics module. The instructions also apply without alteration to the 2nd generation wheel electronics.
scientia non olet · About LEMON Manuals