34 41... Removing and installing or replacing gaiter for handbrake lever

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317

See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .

Unclip gaiter with special tool 00 9 317.

Fig 1: Uncliping Gaiter Using Special Tool 00 9 317

Courtesy of BMW OF NORTH AMERICA, INC.

Pull gaiter (1) over handbrake lever.

Cut cable ties (2) and remove gaiter.

Installation:

Eye of cable tie must face downward.

Fig 2: Identifying Gaiter And Cable Ties

Courtesy of BMW OF NORTH AMERICA, INC.