34 00 010 Checking thickness of brake pad
WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 34 1 260
See BRAKES - SPECIAL TOOLS .
NOTE:
The thickness of the outer brake pads can be determined without removing the wheels.
If necessary, move car until opening for brake pad wear indicator (brake pad) can be seen through rim styling.
If necessary, move car until opening for brake pad wear indicator (brake pad) can be seen through rim styling.
Insert special tool 34 1 260 through rim into opening for brake pad wear indicator.
Press special tool onto brake pad. Slide ring (1) in direction of arrow up to stop and read off measured value.
NOTE:
- Brake disk
- Brake pad with backplate
Safe limit for lining wear, front brake . See BRAKES - TECHNICAL DATA .
Safe limit for lining wear, rear brake . See BRAKES - TECHNICAL DATA .