33 55 041 Replacing anti-roll bar link for anti-roll bar on left or right

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

31 1 140
REAR AXLE - SPECIAL TOOLS .

Release nut (1), gripping with special tool 31 1 140 in the process.

Installation:

Replace self-locking nut.

See Tightening torque 33 55 2AZ in 33 55 STABILIZER BAR .

Release screw (3).

See Tightening torque 33 55 3AZ in 33 55 STABILIZER BAR .

Remove stabilizer link (2) towards top.

Fig 1: Identifying Stabilizer Link And Screws

Courtesy of BMW OF NORTH AMERICA, INC.