33 32 165 Removing and installing or replacing tension strut
WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Observe safety instructions
for raising the vehicle
Driving without the tension strut is not permitted!
Driving without the tension strut is not permitted!
Release screws (1, 3).
Remove tension strut (2).
Installation:
See Tightening torque 33 32 11AZ in 33 32 CONTROL ARMS AND STRUTS .
See Tightening torque 33 32 12AZ in 33 32 CONTROL ARMS AND STRUTS .