32 33 010 Removing And Installing/Replacing Sport Steering Wheel

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Wheel/chassis alignment is not necessary after the steering wheel has been removed and installed or replaced.

Necessary preliminary tasks:

Remove AIRBAG UNIT

M3 with twin clutch transmission

Set road wheels/steering wheel to straight-ahead position.

Disconnect plug connection (1).

If necessary, disconnect plug connection (2) for steering wheel heating.

Release screw (3) and remove steering wheel (4).

Installation:

Make sure connecting lead(s) is/are correctly laid.

Tightening torque 32 33 1AZ .

Fig 1: Identifying Plug Connection, Steering Wheel Heating Plug Connection, Screw & Steering Wheel

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Modify shift paddles (5).

Move wheels/sport steering wheel into straight-ahead position.

Disconnect plug connections (2).

Release screw (1) and remove sport steering wheel.

Installation:

Make sure connecting lead(s) is/are correctly laid.

Tightening torque 32 33 1AZ .

Fig 2: Identifying Plug Connections & Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Align sport steering wheel using markings (1) to steering column and attach.

Replacement:

Modify sport steering wheel cover/switches. See REPLACING COVER FOR SPORT STEERING WHEEL and REMOVING AND INSTALLING/REPLACING BOTH SWITCHES ON SPORT STEERING WHEEL .

Fig 3: Identifying Marks On Steering Column & Steering Wheel

Courtesy of BMW OF NORTH AMERICA, INC.