25 16 065 Replacing Gaiter (Selector Lever Cover) For Shift Tower

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove handle. See REPLACING GRIP/KNOB FOR SHIFT LEVER .

Carefully pull gaiter taut on leather.
Press frame inwards slightly until catch is released.
Lift out gaiter.

Fig 1: Removing Gaiter
Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining lugs must not be damaged.

Fig 2: Locating Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.