23 11 615 Replacing Guide Tube For Clutch Release Unit (GS6-53BZ/DZ)

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (transmission removed)

Necessary preliminary tasks:

Remove clutch release bearing and release lever from guide tube. See REMOVING AND INSTALLING/REPLACING CLUTCH (SAC 240) .

Release screws.

Remove guide tube (1).

Installation:

Clean thread.

Install screws with Loctite 243.

Tightening torque 23 11 2AZ .

Fig 1: Identifying Guide Tube With Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Remove sticker (1) and adhesive with a suitable solvent.

Fig 2: Identifying Sticker

Courtesy of BMW OF NORTH AMERICA, INC.