22 32 001 Replacing Rubber Mount For Transmission Mounting
WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear underbody protection.
- Support transmission with lifter.
Unfasten screws (1) and nuts (2).
Remove transmission Crossmember.
Remove rubber mount from transmission Crossmember.
Tightening torque 24 71 1AZ / 2AZ .
NOTE:
Illustration similar.