22 11 011 Replacing Left Engine Mount (N54)

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Secure engine in INSTALLATION POSITION .
Remove underbody protection.

NOTE: E90/E91/E92 only

Remove stiffening strut (1).

Release screws (2) and remove engine mount.

Tightening torque 22 11 1AZ .

Fig 1: Identifying Stiffening Strut And Engine Mount Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Rubber section (1) of engine mount must point to middle of vehicle.

Engine mount designations:

Right engine mount

Even component number

Left engine mount

Odd component number

Fig 2: Identifying Rubber Section Of Engine Mount
Courtesy of BMW OF NORTH AMERICA, INC.