11 23 010 Removing And Installing/Replacing Vibration Damper (N54)

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove front underbody protection . See 51 47 490 REMOVING AND INSTALLING/REPLACING FRONT UNDERBODY PROTECTION .
Remove drive belt . See 11 28 010 REPLACING ALTERNATOR DRIVE BELT (N54) .

Release screws (1).

Tightening torque. See 11 23 1AZ in VIBRATION DAMPER .

Remove vibration damper (2).

Fig 1: Identifying Vibration Damper With Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.