LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2023 (Engine - Repair) >> Intake Manifold >> 11 61 730 BMW Leak Test For Intake System (N54) >> Vacuum pressure measurement

Vacuum pressure measurement

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

Prepare diagnosis tester on diagnosis unit.

  1. Screw in pressure sensor.
  2. Connect stimuli cables (2) to positive and negative.
  3. Connect 12V battery cables (3) to vehicle battery positive and negative.
  4. Controller for vacuum connection.
  5. Vacuum connection (Red).
    Fig 1: Measuring Vacuum Pressure
    G05501862Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals