For vehicles with automatic transmissions
WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
Secure flywheel with special tool 11 9 260.
Release flywheel screws with a suitable tool (1).
Tightening torque. See 11 22 1AZ in 11 22 FLYWHEEL .
Installation:
The flywheel is secured with a dowel pin.
Fit new flywheel screws .
Assemble engine.