61 31 204 Replacing Switch Combination For Seat Adjustment
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove outer cover on front seat. See SEATS - REPAIR (CONVERTIBLE) .
Disconnect plug connection (2).
Unlock retaining tabs (3) in direction of arrow and remove switch combination (1) from cover.
Installation:
Retaining tabs (3) of cover and guide (4) of switch combination (1) must not be damaged.
Make sure switch combination (1) is correctly seated in retaining tabs (3).