61 31 011 Removing And Installing/Replacing Volute Spring Cassette

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Move wheels into straight-ahead position and do not alter this position during the repair work.

Necessary preliminary tasks:

Remove fixture for steering column stalk

Unlock catches (1).

Press lock (2) and remove volute spring cassette (4) in direction of arrow from fixture for steering column stalk (3).

Fig 1: Removing Volute Spring Cassette

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT:

Do not turn ring (1).
Also turning ring (1) through 360° is not permitted!
Secure ring (1) against unauthorized turning (e.g. with adhesive tape).

Installation:

Notch (3) on ring (1) must line up with arrow (4) on switch (2).

Fig 2: Identifying Switch & Ring

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Fit volute spring cassette (1) so that guide (2) can slide exactly into associated notch on switch (3).

Fig 3: Identifying Volute Spring Cassette

Courtesy of BMW OF NORTH AMERICA, INC.