33 5 040 Open-End Wrench WAF 50 MM With Locking Clip

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

In conjunction with: 33 5 070

NOTE: For releasing and tightening down insert nut for bolt connection of propeller shaft to rear differential.

Series: E70, E88, E90, E91, E92, F01, F02

Storage location: A18

SI number: 01 21 06 (300)

Order number: 33 5 040

Open-end wrench WAF 50 mm with locking clip

Fig 1: Identifying Open-End Wrench WAF 50 MM With Locking Clip (33 5 040)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 33 5 041 Basic body

2 = 33 5 042 Clip

3 = 33 5 043 Pin with chain (2 x)