23 2 150 Pressure Sleeve

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Pressure Sleeve (23 2 150)

Courtesy of BMW OF NORTH AMERICA, INC.

In conjunction with: 23 1 300

NOTE: For fitting deep groove ball bearing of transmission output shaft (260/5, 245/5), for fitting front tapered roller bearing on drive pinion in all rear axle differentials as well as for mounting cover of countershaft (S5D 310Z)

Transmission: 245/5Sport, 260/5, S5D 260Z, S5D 310Z, S5D 320Z

Storage location: B29

Order number: 23 2 150

Pressure sleeve