23 1 440 Holding Sleeve

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Holding Sleeve (23 1 440)

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: For fitting bearing bush and inner bearing race on output shaft as well as for removing bearing on output shaft (S5D 310Z)

Transmission: 265/5, 265/5Sport, 280/5Sport, S5D 310Z

Storage location: C22, C23

Order number: 23 1 440

Holding sleeve