13 0 190 Assembly Kit

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Fig 1: Identifying Assembly Kit (13 0 190)

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: For removing and installing Teflon rings on injector.

Engine: N14, N43, N53, N54, N73H

SI number: 1 20 06 (299)

Order number: 13 0 190

Assembly kit

Consisting of:

1 = 13 0 191 Pliers

2 = 13 0 192 Installation sleeve 1

3 = 13 0 193 Installation sleeve 2

4 = 13 0 194 Installation sleeve 3

5 = 13 0 195 Installation taper