LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2003 (Engine Mechanical) >> Engine >> 11 8 650 Holder

11 8 650 Holder

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools 

NOTE: For removing and installing oil pump drive ring gear.

Engine: N53, N54

SI number: 1 20 06 (299)

Order number: 11 8 650

Holder

Fig 1: Identifying Holder (11 8 650)
G05498991Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals