11 8 530 Removal And Installation Tool

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

NOTE: For removing and installing sealing cap on vacuum pump.

Engine: N53, N54

SI number: 1 20 06 (299)

Order number: 11 8 530

Removal and installation tool

Fig 1: Identifying Removal And Installation Tool (11 8 530)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 11 8 531 Baseplate

2 = 11 8 532 Pressure plate

3 = 11 8 533 Spindle (pressure plate)

4 = 11 8 534 Spindle (removal plate)

5 = 11 8 535 Set of M10 screws (N54)

6 = 11 8 536 Set of M11 screws incl. sleeve (N53)

7 = 11 8 537 Removal plate