11 8 180 Holder

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

NOTE: Blocking flywheel when releasing and tightening down central bolts on vibration damper

Engine: M47T2, M47TU, M57T2, M57TU, M67, N43, N45, N45T, N46, N46T, N47, N47S, N51, N52, N53, N54, W17

Storage location: C45, C46

SI number: 1 12 99 (452)

Order number: 11 8 180

Holder

Fig 1: Identifying Holder (11 8 180)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

2 = 11 8 182 Locking piece

3 = 11 8 183 Basic body

4 = 11 8 184 Adapter

NOTE: E65/M67

5 = 11 8 185 Adapter with setting sleeve

NOTE: E46 M47TU