11 6 260 Mounting Sleeves With Case

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

NOTE: For installing pistons of 85 mm diameter (urgently required for pistons with U-Flex ring)

Engine: M43TU, M44, N51, N52, N52K, N53, N54

Order number: 11 6 260

Mounting sleeves with case

Consisting of:

Fig 1: Identifying Mounting Sleeves With Case (11 6 260)

Courtesy of BMW OF NORTH AMERICA, INC.

1 = 11 6 261 Assembly bush

NOTE: Diameter 85.00 mm

2 = 11 6 262 Assembly bush

NOTE: Diameter 85.08 mm, repair

3 = 11 6 263 Assembly bush

NOTE: Diameter 85.25 mm, stage 1

4 = 11 6 264 Assembly bush

NOTE: Diameter 85.50 mm, stage 2

9 = 11 6 269 Case with foam inlay

NOTE: For holding assembly bushes, gauge 11 6 270 and lever gauge 11 6 250