11 5 460 Removal And Installation Kit

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For removing and installing piston pin circlips.

Engine: M67TU, N54, N57

SI number: 1 14 05 (198)

Order number: 11 5 460

Removal and installation kit

Consisting of:

Fig 1: Identifying Removal And Installation Kit (11 5 460)

Courtesy of BMW OF NORTH AMERICA, INC.

1 = 11 5 461 Holder

2 = 11 5 462 Installation pliers

3 = 11 5 463 Drift

4 = 11 5 464 Removal pliers