LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1969 (General Electrical System - Tightening Torques (E82)) >> Auxiliary Cable >> 61 12 Auxiliary Cable

61 12 Auxiliary Cable

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
AUXILIARY CABLE - TIGHTENING TORQUE SPECIFICATION TABLE

- Type Thread Tightening specification Measure
1AZ Battery positive lead to distributor, luggage compartment E60/E61/E63/E64/E65/E66/E70/E71/E81/E82/E83/E87/E88/E90/E91/E92/E93 M8 - 15 Nm
2AZ Battery positive lead to connector, engine compartment partition wall E83 M8 - 19 Nm
3AZ Battery positive lead to connection support point, luggage compartment floor E60/E61/E63/E64/E65/E66/E70/E71/E81/E82/E85/E86/E87/E88/E90/E91/E92/E93 M8 - 15 Nm
4AZ Battery positive lead to engine compartment B+ terminal E70/E71/E81/E82/E85/E86/E87/E88/E90/E91/E92/E93 M8 - 15 Nm
- E70/E71/E81/E82/E85/E86/E87/E88/E90/E91/E92/E93 M6 - 8 Nm
5AZ Battery negative lead to body E70/E71/E81/E82/E85/E86/E87/E88/E93 M8 - 15 Nm