51 13 Trim Parts, Covers, Handle Trim
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
TRIM PARTS, COVERS, HANDLE TRIM - TIGHTENING TORQUE SPECIFICATION TABLE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Bracket, roof luggage rack on body | E36/Z3 and M Coupe, E39, E46, E81, E82, E87, E90, E91, E92 | M10 | - | 20 Nm |
| 2AZ Water drain to body (plastic nut) | E46 | - | - | 1 Nm |
| Water drain to body (metal nut or rivet nut) | E46 | - | - | 1.8 Nm |
| 3AZ Roof railing to body | E39 | - | Centre, front, rear | 24 Nm |
| - | E61 | M8 | - | 16 Nm |
| - | - | - | settling time | 15 min |
| - | - | - | Check | 16 Nm |
| - | E83 | M8 | Front | - |
| - | - | - | Jointing torque | 21 Nm |
| - | - | - | Release nut after settling time | 15 min |
| - | - | - | Jointing torque | 21 Nm |
| - | - | - | Torque angle | 120 ± 10° |
| - | E83 | M8 | Centre, rear | 21 Nm |
| - | - | - | settling time | 15 min |
| - | - | - | Check | 21 Nm |
| - | E91 | - | - | 25 Nm |
| - | E70 | - | - | 19 Nm |
| - | E71 | - | - | 16 Nm |
| 4AZ Handle strip to rear lid | E39/Touring | - | - | 3 Nm |
| - | E46, E53 | - | - | 2.5 Nm |
| - | E83 | - | - | 1.8 Nm |
| 5AZ Cowl panel cover to body | E60, E61, E63, E64 | - | - | 2.5 Nm |
| 6AZ Centre trim to rear lid | E65, E66, E67 | M8 | - | 2.5 Nm |
| 7AZ Trim to hood/bonnet | E90, E91 | - | - | 2 Nm |