41 35 Side Panels
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
SIDE PANELS - TIGHTENING TORQUE SPECIFICATION TABLE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Front side panel to body | E63/E64 | M6 x 22 10.9 | - | 12 Nm |
| - | E83 | ST6.3x14 | - | 7 Nm |
| - | E60/E61/E81/E82/E85/E86/E87/E88/E90/E91/E92/E93 | M6 | - | 7.6 Nm |
| 2AZ Front side panel to body | E63/E64 | M6 nut | - | 5 Nm |
| - | E60/E61 | M6 nut | - | 7.6 Nm |
| 3AZ Front side panel to body | E60/E61 | Sheet metal screw ST4.8x19 | - | 7.6 Nm |
| 4AZ Combination holder, side panel, front, to body | E81/E82/E87/E88/E92 | M6 | - | 7.6 Nm |
| 5AZ Side panel, rear, to body | E85/E86 | M6 | - | 7.6 Nm |
| 6AZ Side panel, front, to module carrier/bumper carrier | E70/E71 | M6x16 | - | 8 Nm |
| 7AZ Front side panel to body Area, A-pillar | E70/E71 | M6x16 | - | 6 Nm |
| 8AZ Front side panel to body Area, sill | E70/E71 | Sheet metal screw ST4.8x19 | - | 2.5 Nm |
| 9AZ Front side panel to body Area, cowl panel | E70/E71 | M5x20 | - | 2.5 Nm |
| 10AZ Module carrier, top, to support carrier | E70/E71 | M6x26 | - | 8 Nm |
| 11AZ Module carrier, bottom, to engine carrier | E70/E71 | M6 nut | - | 8 Nm |