41 61 Engine Bonnet/Hood
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE BONNET/HOOD - TIGHTENING TORQUE SPECIFICATION TABLE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Engine bonnet/hood to bonnet/hood hinge | E63/E64 | M8 8.8 | - | 18.5 Nm |
| - | E81/E82/E83/E87/E88/E90/E91/E92/E93 | M8 | - | 15 Nm |
| - | E60/E61 | M8x24 8.8 | - | 18.5 Nm |
| - | E85/E86/E70/E71 | M8 | - | 20 Nm |
| 2AZ Bonnet/hood hinge to body | E63/E64 | M8 8.8 | - | 18.5 Nm |
| - | E83 | M8x20 10.9 | - | 15 Nm |
| - | E83 from 05/2006 | M8x30 10.9 | - | 25 Nm |
| - | E60/E61 | M8x24 8.8 | - | 18.5 Nm |
| - | E81/E82/E85/E86/E87/E88/E90/E91/E92/E93/E70/E71 | M8 | - | 20 Nm |
| 3AZ Threaded pin, spacer | E70/E71 | M6 | - | 14 Nm |