LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 196 (Transfer Case - Removal & Installation) >> Removal & Installation >> Transfer Box Replacement (ATC 500 X-Drive Transfer Box) >> Notes

Transfer Box Replacement (ATC 500 X-Drive Transfer Box): Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 BMW X5, 2005 BMW X5, 2004 BMW X5, 2003 BMW X5, and 2002 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Numbers in text refer to numbers in figures.
NOTE: When replacing the transfer box, it is important to delete the self adapting wear values (oil, clutch) in the transfer box control unit. After completing work, check transmission fluid level and top up if necessary. Fluid level should be to lower edge of filler plug (1). See Figure. Use only the approved gear oil. See TRANSFER CASE - SERVICING article.