12 42 Wires To Starter
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
WIRES TO STARTER - TIGHTENING TORQUE TABLE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Battery positive terminal in/on distribution box | E32/E34/E31/E36/E46/E87/E90/E85/E86/E81 | M8 | - | 20 Nm |
| - | E39/M57 | M8 | - | 11 Nm |
| - | E38/M67 | M8 | - | 11 Nm |
| - | E46/M47TU | M8 | - | 11 Nm |
| - | E60/N62 | M8 | - | 15 Nm |
| - | E65/N62/N73 | M8 | - | 15 Nm |
| 2AZ Wiring harness on distributor | E36/M41 | M8 | - | 10 Nm |