11 24 Connecting Rods And Bearings
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
CONNECTING RODS AND BEARINGS - TIGHTENING TORQUE
| Type | Thread | Description | Tightening Specification | |
|---|---|---|---|---|
| 1AZ ASA screw (connecting rod bolt) (12 x) Connecting rod bearing cap to connecting rod. |
N52K | M8 x 47 | Replace screw. Screw washed and oiled. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 20 Nm | |||
| Torque angle | 120 ° |