84 50 060 Removing and installing or replacing Bluetooth aerial

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove pedal assembly trim . See 51 45 185 REMOVING AND INSTALLING/REPLACING PANEL FOR PEDALS (CONVERTIBLE) or 51 45 185 REMOVING AND INSTALLING/REPLACING PANEL FOR PEDALS (COUPE) .

Version A:

Disconnect plug connection (1) and unclip aerial (3) from mountings (2).

Fig 1: Identifying Plug Connection, Aerial And Mountings (Version A)

Courtesy of BMW OF NORTH AMERICA, INC.

Version B:

Disconnect associated plug connection.

Release retaining clips (1).

Installation:

Do not damage pedal assembly panelling in working area.

Replace damaged retaining clips.

Remove Bluetooth aerial (2).

Fig 2: Identifying Retaining Clips And Bluetooth Aerials (Version B)

Courtesy of BMW OF NORTH AMERICA, INC.