65 75 055 Removing and Installing/Replacing Emergency Power Siren With Tilt Sensor

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove rear left wheel arch cover . Refer to 51 71 041 REMOVING AND INSTALLING/REPLACING REAR LEFT OR RIGHT WHEEL ARCH COVER (Coupe).

Release screws (1) and lower complete mounting plate (2).

Unlock and disconnect associated plug connection, remove complete mounting plate (2).

Fig 1: Identifying Screws & Lower Complete Mounting Plate

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1) and remove emergency power siren with tilt sensor (2) from mounting plate (3).

Fig 2: Identifying Nut, Sensor And Mounting Plate

Courtesy of BMW OF NORTH AMERICA, INC.