LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1938 (Sunroof - Repair) >> Mechanical Sun Roof Components >> 54 12 115 Removing And Installing Glass Slide/Tilt Sunroof Lid

54 12 115 Removing And Installing Glass Slide/Tilt Sunroof Lid

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Release left and right screws (1).

Lift glass slide/tilt sunroof lid upwards to remove.

Installation: 

Replace screws and insert with Loctite.

Adjust  glass slide/tilt sunroof lid. Refer to 54 12 003 Adjusting Glass Slide/Tilt Sunroof Lid .

Tightening torque, see 54 12 01AZ in 54 12 MECHANICAL SUN ROOF COMPONENTS .

Initialize  glass slide/tilt sunroof. Refer to 54 0... Notes On Steel & Glass Slide/Tilt Sunroofs (Initialization/Normalization/Learning Of Characteristic Curve) .

Fig 1: Identifying Glass Slide Screws
G04727385Courtesy of BMW OF NORTH AMERICA, INC.