52 26... Removing And Installing/Replacing Cup Holder In Armrest For Rear Seat Backrest

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Open armrest.

Open cup holder.

Release screws (1) on left and right.

Remove complete cup holder towards front.

Fig 1: Identifying Cup Holder Screws

Courtesy of BMW OF NORTH AMERICA, INC.