52 26 199 Removing And Installing/Replacing Rear Panel On Left Rear Seat Backrest
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove backrest for rear seat . Refer to 52 26 020 Removing And Installing/Replacing Both Backrests For Rear Seat .
- Remove cover strip or ski bag . Refer to 52 26 030 Removing And Installing Complete Centre Armrest For Rear Seat Backrest (Through-Loading) and 52 26... Removing And Installing/Replacing Ski Bag With Casing On Rear Seat (Through-Loading System) .
Lever backrest cover all round out of backrest frame.
Detach rear panel (2) with flat scraper (1) from rear seat backrest.
Installation:
Comply with instructions issued by manufacturer of universal spray adhesive.
Apply universal spray adhesive to rear panel and rear seat backrest.
Fit and align rear panel within the air drying time (see manufacturer's instructions).
Observe and adhere to curing time to prevent rear panels from slipping.