LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1937 (Seats - Repair (E82)) >> Rear Seat, Through-Loading >> 52 26 070 Removing And Installing/Replacing Filler Element

52 26 070 Removing And Installing/Replacing Filler Element

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Fold filler element forwards out of backrest.

Pull welt out of guide of skibag trim.

Fig 1: Pulling Welt Out Of Guide Of Skibag Trim
G05779752Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals