52 13 198 Removing And Installing/Replacing Rear Panel On Left Or Right Front Seat Backrest
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Release clips (1) with diagonal cutting pliers.
Remove rear panel (2) downwards with a turning action.
NOTE:
Remove remnants of clips.
Installation:
Retaining hooks (1) and bore holes (2) on rear panel (3) must not be damaged.
Replace faulty clips.